AMP

amp-fx-collection

Description

Provides a collection of preset visual effects, such as parallax.

 

Required Scripts

<script async custom-element="amp-fx-collection" src="https://cdn.ampproject.org/v0/amp-fx-collection-0.1.js"></script>

Usage

The amp-fx-collection component provides a collection of preset visual effects, such as parallax that can be easily enabled on any element via attributes.

Apply visual effects

To specify a visual effect for an element, add the amp-fx attribute with the value of the visual effect.

Below are the supported visual effects for the amp-fx-collection:

parallax

The parallax effect allows an element to move as if it is nearer or farther relative to the foreground of the page content. As the user scrolls the page, the element scrolls faster or slower depending on the value assigned to the data-parallax-factor attribute.

data-parallax-factor

Specifies a decimal value that controls how much faster or slower the element scrolls relative to the scrolling speed:

  • A value greater than 1 scrolls the element upward (element scrolls faster) when the user scrolls down the page.
  • A value less than 1 scrolls the element downward (element scrolls slower) when the user scrolls downward.
  • A value of 1 behaves normally.
  • A value of 0 effectively makes the element scroll fixed with the page.

In this example, as the user scrolls the page, the h1 element scrolls faster relative to the page's content.

<h1 amp-fx="parallax" data-parallax-factor="1.5">
  A title that moves faster than other content.
</h1>

fade-in

The fade-in effect allows an element to fade in once the element being targeted is visible in the viewport.

data-duration (optional)

This is the duration over which the animation takes places. The default value is 1000ms.

In the below example, the animation lasts over 2000ms.

<div amp-fx="fade-in" data-duration="2000ms">
  <amp-img
    width="1600"
    height="900"
    layout="responsive"
    src="https://picsum.photos/1600/900?image=1069"
  ></amp-img>
</div>

data-easing (optional)

This parameter lets you vary the animation's speed over the course of its duration. The default is ease-in which is cubic-bezier(0.40, 0.00, 0.40, 1.00). You can choose from one of the presets available:

  • "linear" - cubic-bezier(0.00, 0.00, 1.00, 1.00)
  • "ease-in-out" - cubic-bezier(0.80, 0.00, 0.20, 1.00)
  • "ease-in" - cubic-bezier(0.80, 0.00, 0.60, 1.00) (default)
  • "ease-out" - cubic-bezier(0.40, 0.00, 0.40, 1.00)
  • Specify a custom-bezier() input.

In the below example, the animation acceleration curve is a custom specified cubic-bezier(...) curve.

<div amp-fx="fade-in" data-easing="cubic-bezier(0.40, 0.00, 0.40, 1.00)">
  <amp-img
    width="1600"
    height="900"
    layout="responsive"
    src="https://picsum.photos/1600/900?image=1069"
  ></amp-img>
</div>

data-margin-start (optional)

This parameter determines when to trigger the timed animation. The value specified in <percent> dictates that the animation should be triggered when the element has crossed that percentage of the viewport. The default value is 5%.

In the below example, the animation doesn't start until the element has crossed 20% of the viewport from the bottom.

<div amp-fx="fade-in" data-margin-start="20%">
  <amp-img
    width="1600"
    height="900"
    layout="responsive"
    src="https://picsum.photos/1600/900?image=1069"
  ></amp-img>
</div>

fade-in-scroll

The fade-in-scroll effect allows you to change the opacity of an element as it scrolls within the viewport. This creates a scroll dependent fade animation. By default once the element is fully visible we don't animate the opacity anymore.

data-margin-start (optional)

This parameter determines when to trigger the timed animation. The value specified in <percent> dictates that the animation should be triggered when the element has crossed that percentage of the viewport. The default value is 0%.

data-margin-end (optional)

This parameter determines when to stop the animation. The value specified in <percent> dictates that the animation should have finished when the specified amount of the element being targeted is visible. The default value is 50%.

In the below example, the <div> is fully visible by the time it has crossed 80% of the viewport from the bottom.

<div amp-fx="fade-in-scroll" data-margin-end="80%">
  <amp-img
    width="1600"
    height="900"
    layout="responsive"
    src="https://picsum.photos/1600/900?image=1069"
  ></amp-img>
</div>

data-repeat (optional)

By default once the element is fully visible we don't animate the opacity anymore. If you want the opacity to change with the scroll, even when the element has fully loaded, specify this variable on the animation.

In the below example, the animation is fully dependent on scroll and the <div> fades in and out as the user scrolls.

<div amp-fx="fade-in-scroll" data-repeat>
  <amp-img
    width="1600"
    height="900"
    layout="responsive"
    src="https://picsum.photos/1600/900?image=1069"
  ></amp-img>
</div>

float-in-top, float-in-bottom

The float-in-top and float-in-bottom effects slide a position: fixed element in-and-out of view as the document is scrolled up or down.

An element with amp-fx="float-in-top" or amp-fx="float-in-bottom" must have the following CSS properties:

  • position: fixed
  • overflow: hidden
  • if it's top, top: 0
  • if it's bottom, bottom: 0

If any of these is not set, the effect will not be applied and a warning will be thrown in development mode.

fly-in-bottom, fly-in-left, fly-in-right, fly-in-top

The fly-in-bottom, fly-in-left, fly-in-right, and fly-in-top effects allow an element's position to be translated by a specified amount once it is in the viewport.

data-duration (optional)

This is the duration over which the animation takes places. The default value differs across devices as follows: Between 480 px (the minimum width of a mobile device) and 1000px (the minimum width of a laptop screen width), we scale the default duration between 400ms and 600ms.

Here are some examples to help you better understand this:

  1. screen width - 610px the default duration for a fly-in-bottom would be 450ms.
  2. screen width - 675px the default duration for a fly-in-bottom would be 475ms.
  3. screen width - 740px the default duration for a fly-in-bottom would be 500ms.
  4. screen width - 805px the default duration for a fly-in-bottom would be 525ms.
  5. screen width - 870px the default duration for a fly-in-bottom would be 550ms.

If the user overrides this default value of data-duration to Xms, the same default will apply across all devices.

data-easing (optional)

This parameter lets you vary the animation's speed over the course of its duration. The default is ease-out which is cubic-bezier(0.40, 0.00, 0.40, 1.00). You can choose from one of the presets available:

  • "linear" - cubic-bezier(0.00, 0.00, 1.00, 1.00)
  • "ease-in-out" - cubic-bezier(0.80, 0.00, 0.20, 1.00)
  • "ease-in" - cubic-bezier(0.80, 0.00, 0.60, 1.00)
  • "ease-out" - cubic-bezier(0.40, 0.00, 0.40, 1.00) (default)
  • Specify a custom-bezier() input.

data-fly-in-distance (optional)

This parameter determines the translation to take place. The value is specified in <percent> of viewport. The default value are as follows:

`amp-fx` value Mobile Tablet Desktop
`fly-in-bottom` `25%` `25%` `33%`
`fly-in-top` `25%` `25%` `33%`
`fly-in-left` `100%` `100%` `100%`
`fly-in-right` `100%` `100%` `100%`

In the below example, the element is translated along the Y axis across 20% of the viewport.

<div amp-fx="fly-in-bottom" data-fly-in-distance="20%">
  <amp-img
    width="1600"
    height="900"
    layout="responsive"
    src="https://picsum.photos/1600/900?image=1069"
  ></amp-img>
</div>

data-margin-start (optional)

This parameter determines when to trigger the timed animation. The value specified in <percent> dictates that the animation should be triggered when the element has crossed that percentage of the viewport. The default value is 5%.

Combine visual effects

Developers can also combine amp-fx presets together to create combined animations.

In the below example, the element is both translated along the Y axis and has it's opacity changed from 0 to 1 over a duration of 1000ms.

<div amp-fx="fade-in fly-in-bottom" data-duration="1000ms">
  <amp-img
    width="1600"
    height="900"
    layout="responsive"
    src="https://picsum.photos/1600/900?image=1069"
  ></amp-img>
</div>

However, there are some presets which don't combine together to create great results. In such cases, we accept the first preset listed and ignore the clashing preset and warn in the console.

In the below example, the element is being translated along the Y axis by two clashing presets parallax and fly-in-bottom. In this case we only allow the parallax animation and ignore the fly-in-bottom preset.

<div amp-fx="parallax fly-in-bottom" data-parallax-factor="1.5">
  <amp-img
    width="1600"
    height="900"
    layout="responsive"
    src="https://picsum.photos/1600/900?image=1069"
  ></amp-img>
</div>

Below is a list of group of presets, AMP advises you don't combine:

  1. parallax, fly-in-top, fly-in-bottom,
  2. fly-in-left, fly-in-right,
  3. fade-in, fade-in-scroll.

Validation

See amp-fx-collection rules in the AMP validator specification.

Perlu bantuan lainnya?

Anda telah membaca dokumen ini belasan kali, tetapi belum semua pertanyaan Anda terjawab? Mungkin orang lain merasakan hal yang sama. Berinteraksilah dengan mereka di Stack Overflow.

Kunjungi Stack Overflow
Menemukan bug atau ada fitur yang kurang?

Proyek AMP sangat menganjurkan partisipasi dan kontribusi Anda! Kami berharap Anda akan terus ambil bagian dalam komunitas sumber terbuka kami, tetapi kami juga menerima kontribusi satu kali untuk topik tertentu yang Anda minati.

Kunjungi GitHub